San Francisco Power Outage Status Now

Check the Current San Francisco Outage Status

Open {site} and look for the official outage map or outage status page. This is the best place to check whether the utility has confirmed an active interruption in San Francisco.

The map may take a moment to load on a phone. Allow location access if you want the tool to start near your current position, or move the map to San Francisco manually. Zoom in far enough to see individual outage areas. A broad view can combine incidents or hide local details.

Look for a map marker, shaded boundary, or status result covering your location. Select the incident to open any available details. If the map shows no confirmed outage near you, that does not always mean your electricity is working normally. A new interruption may not have been reported or added to the map yet.

Searches for “power outage San Francisco now” or “power outage San Francisco today” can show old news reports and unofficial posts. Check the date and rely on the utility’s current status tool before drawing a conclusion.

Search by Address or ZIP Code

Use the location field in the official outage tool if one is available. Enter the full San Francisco service address for the most specific result. Include the street number, street name, and ZIP code, then choose the matching suggestion if the tool displays several locations.

1. Open the outage map or status page.
2. Find the address, location, or ZIP code search field.
3. Enter the service address where the electricity is out.
4. Select the correct suggested address.
5. Review the map and any incident panel that appears.

A ZIP code search can show the general area, but it may include multiple neighborhoods or separate incidents. Zoom in and compare the outage boundary with the exact service location. Do not assume that every address in a displayed ZIP code is affected.

If the address is rejected, check the spelling and remove apartment or unit details. The utility usually needs the location of the electric meter rather than a mailing address. You can also move the map manually to the property and select a nearby outage marker.

View Estimated Restoration Information

Select the confirmed incident on the official map to see the information currently available. Depending on the stage of the response, the incident panel may show the number of affected customers, a reported or preliminary cause, whether a crew has been assigned, and an estimated restoration time.

Some fields may be blank, marked as under investigation, or updated later. An estimate is not a guarantee. It can change after crews inspect equipment, identify damage, or encounter unsafe conditions. Refresh the official status page periodically and check the time of the latest update.

Read the wording carefully. A crew being notified, traveling, assessing damage, or making repairs represents different stages of work. If several incidents appear close together, confirm that the details belong to the marker covering your address.

Report a Power Outage

If the official tool does not show your location, report the outage through the utility’s outage reporting option on {site}. Reporting helps the utility identify an interruption that has not yet appeared publicly.

Have the following information ready:

• The exact San Francisco service address.
• The account holder’s name, if requested.
• An account number or other account verification details, if available.
• A description of what you see, such as whether nearby buildings or streetlights also appear dark.
• Details about damaged equipment, sparks, smoke, or fallen wires, without approaching them.

You may be able to report by signing in or by verifying the service location without accessing an account. Follow the choices shown in the official reporting tool. Submit one clear report, save any confirmation or incident reference, and then check the status page for updates.

If only your home is affected, check whether neighboring properties have power. A tripped breaker or problem inside the building may not be a utility outage. Do not handle electrical panels if they are wet, damaged, hot, or making unusual sounds.

What to Do During an Outage

Use flashlights instead of candles. Keep refrigerator and freezer doors closed to preserve cold air. Disconnect sensitive electronics and turn off appliances that were running when power failed. Leave one light switched on so you can tell when service returns.

• Treat every fallen wire as energized and stay well away from it.
• Keep children and pets away from damaged electrical equipment.
• Never use a generator, grill, or fuel-burning heater inside a home, garage, or other enclosed space.
• Do not enter flooded areas where electrical equipment may be present.
• Follow official evacuation or public-safety instructions immediately.

Contact emergency services, not only the utility, when there is a fire, serious injury, immediate danger, suspected carbon monoxide exposure, or a person trapped by powered medical or building equipment. Report fallen wires and damaged utility equipment through the official utility channel as well, but do not approach the hazard.

Get Outage Updates

Return to the official outage map and search the same service address to follow an already reported incident. Select its marker and check the latest status, crew information, and restoration estimate. Refresh the page if it has remained open for a while.

If the reporting process offers status notifications, follow the prompts to enroll using the contact method connected with the account. Confirm that the displayed contact details belong to you before requesting alerts. Keep the incident reference or confirmation message so you can match later updates to the correct outage.

Official alerts may also appear in the utility account’s notification settings or in public safety announcements. Use the outage map as the main source for restoration information. If your incident disappears but power remains off, search the address again and submit a new report if the official tool instructs you to do so.