Power Outage in SLC: Check Status and Report It

Check the Current SLC Outage Status

Open {site} and choose the outage map or outage center. Enter the service address, ZIP code, or Salt Lake City in the search field. If location access is available, you may also use it to center the map near you.

The official SLC outage map may show affected areas, the number of customers without service, when an incident was first recorded, crew status, and an estimated restoration time. The details shown depend on what the electric utility has confirmed. A map marker covering a wide area does not necessarily identify every affected address.

If you searched for power outage SLC, power outage in SLC, or power outage near SLC, confirm that the result belongs to the electric utility listed on your bill. Use the utility's own map rather than neighborhood posts or third-party outage trackers. Refresh the map periodically to see the latest SLC power outage status.

Report a Power Outage

If your address is not shown, report the outage to the electric utility that serves the property. Have the service address and account holder's name ready. An account number can help identify the location, but follow the utility's instructions if you do not have it nearby.

To report a power outage SLC online, open {site}, select the outage reporting option, and follow the prompts. You may be asked to sign in or verify the service address. Describe whether the power is completely off, flickering, or limited to part of the property.

You can also use the utility's official outage-reporting phone option. Find the verified number in the contact block on this page, on your utility bill, or in your account materials. Follow the automated prompts or give the representative the exact service address. Do not assume a neighbor has already reported the same Salt Lake City power outage.

After submitting the report, save any confirmation or reference information. If the form says the outage is already known, you normally do not need to submit it repeatedly unless conditions change or the utility asks for another report.

Find an Estimated Restoration Time

Return to the power outage map SLC residents use and select the marker or outage area that includes your address. A restoration estimate may appear in the incident details, your account, a confirmation message, or an outage notification from the utility.

An estimate is not a promise. Crews may need to inspect equipment, make the area safe, locate damage, or complete repairs in stages. The displayed time can move earlier or later as field information becomes available. Some incidents will show no estimate until an assessment is complete.

Keep checking the official map and any notifications you have enabled. If the map says service is restored but your property remains without power, complete the basic checks below and report the continuing outage again. Include the fact that nearby service appears to have returned.

What to Check Before Reporting the Outage

A few quick checks can show whether the problem is a utility outage or an issue inside one property. Do not open electrical equipment, touch damaged parts, or investigate anywhere that feels unsafe.

• Look through a window to see whether nearby homes, streetlights, or businesses also appear dark.
• Ask a nearby neighbor whether their power is off, if you can do so safely.
• Check whether only one room, outlet, or appliance has lost power. That usually points to an internal circuit rather than a neighborhood outage.
• Look at the breaker panel only if it is dry, undamaged, and safe to approach. A tripped breaker may explain a limited loss of power.
• Check whether a planned interruption notice was previously sent for the property.
• If you live in a managed building, contact the property manager when common areas have power but your unit does not.

Do not repeatedly reset a breaker that trips again. Unplug affected equipment and contact a qualified electrician or the property manager. If multiple properties are dark or the SLC outage map identifies your area, report the utility outage through the official process.

Report a Dangerous Electrical Problem

Treat downed or sagging lines, damaged poles, broken utility equipment, sparks, smoke, fire, and buzzing electrical debris as immediate hazards. Stay far away and keep children and pets back. A line can be energized even if it is not moving, sparking, or making noise.

Do not touch the line or anything contacting it, including a fence, tree, vehicle, or standing water. Do not drive over a fallen wire. From a safe location, contact emergency services when there is immediate danger, fire, injury, or a threat to public safety. Then notify the electric utility through its official emergency or hazard-reporting option.

If a wire falls on a vehicle, occupants should generally remain inside and wait for trained responders unless fire or another immediate danger makes staying impossible. Follow the instructions of emergency personnel. A dangerous electrical problem should not be reported only as a routine power outage Salt Lake City map entry.

Prepare While the Power Is Off

• Use flashlights or battery-powered lights. Avoid candles because they can start a fire.
• Turn off or unplug sensitive electronics and heat-producing appliances. Leave one light switched on so you can tell when service returns.
• Keep refrigerator and freezer doors closed as much as possible. Discard food if you are unsure whether it remained at a safe temperature.
• Never operate a generator, grill, or fuel-burning heater indoors or in an enclosed space. Keep exhaust away from doors, windows, and vents.
• Check backup power for essential medical devices. If a device cannot operate safely, follow the care plan from the equipment provider or medical professional and seek emergency help when needed.
• Conserve phone battery, use low-power mode, and keep outage notifications enabled. A battery-powered radio can provide information if mobile service is limited.
• Check on household members and nearby people who may need help, without entering an unsafe area.

When power returns, reconnect appliances gradually. If you notice smoke, burning smells, heat, sparks, or repeated breaker trips, turn away from the affected area and get qualified help. Continue monitoring the official SLC power outage page until the incident is marked resolved for your location.